Hey everyone. I just wanted to share how I made this windmill decor because I love the way it turned out and it was so easy!
A little back-story… Earlier this year my husband and I set out to make ourselves a little garden out of as many recycled materials as possible. A work friend gave us some old and rusty roofing tin that was so perfect for the job. The last touch I added to the garden was the sign above the entrance that read “Martin Family Farm, Welcome to the Garden” with a chicken and a windmill decal that I cut out of vinyl with my Cricut. I love that thing.
the rustic, farmhouse look of the garden, and I liked the windmill decal, and I
had an empty space on the wall in our short-term rental home. It was one of
those “The stars just aligned” scenarios.
a fan blade-shaped stencil out of printer paper and traced it onto the scrapes
of tin with a Sharpie. My husband let me use his neutral-direction metal shears
to cut out the shapes. Four blisters, two puncture wounds, and one tetanus
scare later, I had 12 blades and two tail pieces in front of me. I just eye-balled
the shape of the tail pieces.
or so prior, our neighbor asked if we could use a massive metal spool of sorts for
scrap metal and my husband can’t turn down anything free… He cut off the
round end piece and let me use it for the windmill. I cut a slit into each
blade and fit them all evenly around the circle. Then I attached the tail
pieces to the frame with handy wire.
If I remember correctly, I took a break around this time to wrap my wounds and get a cold beer to hold against my aching hands. See! I’m getting double uses out of all sorts of materials today! #goinggreen
I used a hammer and nail to make a hole in the middle of the narrow ends of the
blades. Then I laced handy wire through the holes and when I made it back
around to the first blade, I twisted the ends of the wire together and tucked the
twist out of sight.
Boom! I had myself a damn good-looking piece of art, straight from the farm, to fill the empty space on the wall.
it up high, out of reach of children and with a shit ton 3-inch screws because the
sharp edges would be like a guillotine if it fell onto an unsuspecting person
or pet. We can’t have that!
As you can see we still have a few items to cross off our to-do list: crown molding above pantry, paint touch-up above the stairs, dry wall.
Thanks for reading. I hope it has inspired you to build something beautiful with recycled materials. Share your ideas below!
One last thing! Should I write a post about building the garden?
Earlier this year my sister-in-law
asked me to make invitations for her upcoming bridal shower. I made the
invitations for my wedding and I was beginning my dive into surface pattern
design at the time, so it was perfect timing for this challenge. She told me I
had free creative reign over the invitations, but I still poked for some
criteria to follow. What she came up with was that the bridal shower would be
tea party themed… Alice in Wonderland (AIW) tea party, and the colors were red
If you’ve Googled it before then you
know that Etsy, and Pinterest and every other creative platform is riddled with
AIW themed invitations and graphics and playing cards and more. However, it was
all too bold, or for a baby shower, or stereotypical. NO! I was envisioning
elegant, mature, and unique. I know that those are not the typical words used
to describe AIW, but I was determined. I dream big!
I did about a month of research and
brainstorming then set out to make it happen. After trial and error and many,
many trips to every craft store in town, my vision came to life.
Below I share the files I created
with you for FREE and all you must do is print and assemble them and then of
course share this post with everyone you know!
Alice In Wonderland Tea Bag Bridal Shower Invitation
DRINK ME/TEA TAG: I started by
printing a “drink me” tag and a tea info tag, one on either side of a single
piece of cardstock. To do so, print one document, then place the cardstock back
into the printer, printed side up (adjust if your print feeds differently) and
print the second document. REMEMBER TO PERSONALIZE THE “TEA INFO TAG” WITH
INFORMATION ABOUT YOUR TEA IF YOU BOUGHT A DIFFERENT TYPE THAN I DID. I
recommend cutting loosely around the shape and then cleaning up the edges in
case they don’t perfectly line up. As you can see, mine was off a bit but I
chose to not reprint them. Cut all those puppies out and then put some
band-aids on your scissor blisters.
Take this opportunity to cut 6” long
pieces of twine, tie a knot in one end, and staple it to the tag you just
CARD: I created the recipe side of these cards. However, I purchased the
digital file of the playing cards here. This is the one
file I cannot supply you with because they are not mine to give but I encourage
you to purchase them for yourself. If you do, open the files into software such
as Adobe Illustrator or GIMP, ungroup the individual cards and resize them to
4”x6”. You will have to tweak your printing process to make the recipe graphic
and the playing card graphic align perfectly on both sides of the card. Instead
of cardstock this time, I printed them on 4”x6” unlined notecards from Staples,
and then just rounded the corners as they came out of the printer. It was a
time-saver and looked professional with the straight edges.
If you don’t want to purchase these playing cards, or if resizing them seems
too difficult then I think the recipe card alone is just fine!
Print the instructions, cut them into
squares, and paperclip them to the recipe cards. Fair warning: you still won’t
get all of the recipe cards back (so much for a full deck of 52)! But, this
instruction card helps with that.
REMEMBER TO PERSONALIZE YOUR INVITATION TO FIT THE BRIDAL SHOWER OR EVENT YOU
ARE HOSTING. The actual invitation is printed on 8.5”x11” vellum and then
folded into a “teabag.” NOTE: make sure to fold it to appropriate size to fit
into your envelope. In my case, the envelopes were 5”x7” so I folded the vellum
to 4.75” x 6.75”. The easiest way to do that was to use the grid on my cutting
mat as a folding surface. I purchased this vellum paper at Hobby Lobby. I used
double-sided tape to close the overlapping ends. Then folded it over and used
one staple to close the bottom end. I tapered the top two corners and folded
down the top to create the tea bag look.
Almost Done! Now to fill the
tea bag with tea! I poured about a couple big spoonfuls of Tiesta Blueberry Wild Child
loose leaf tea into each bag. This stuff smells amazing! I folded the top back
over. I slipped a key charm onto the twine and stapled it onto both sides of
the top of the teabag, and then pulled the twine tight to the staple. I chose
small, vintage-y key charms from Hobby Lobby, but a variety of other charms
would also work. Again, I was going for a subtle AIW look.
Lastly, print the names and
addresses on the back of the envelopes (mine were silver and 5”x7” from
Staples). REMEMBER TO PERSONALIZE THE ENVELOPE DOWNLOAD BEFORE PRINTING. Hand-writing the
names and address would work just fine too. Finally, slide a recipe card and a giant
teabag into each envelope and DONE!
I got so many compliments on
these. I’d love to hear about your experience making them below! P.S. I don’t
make a commission off any of the products I mentioned above.
Is that title a mouthful, or
what?! Follow along to see how I created this country/farm-style work of art!
About a month ago my
husband and I came across a whole bedroom set and a couch at a yard sale. It was
exactly what we had been looking for to furnish our short-term rental house;
modern, can be disassembled, yet inexpensive. We really scored with this
We get home and begin hauling
everything up the stairs to the apartment above our shop. This space was a
messy construction zone for a year and a half, so it was truly a shock when we
got the couch reassembled and freshly laundered covers put on. Our view of the
place completely transformed. We took off our shoes for the first time up there
and sprawled on the couch in amazement!
Now it was officially time to decorate the place and ideas had been floating
around my mind for a while now. The first project I tackled was this vintage,
window-framed barn college.
Our wedding was just over a
year ago, and I know it’s hard to believe but I DIYed and thrifted the entire
event. Another yard sale find that I got at the time were two white, dirty,
flaking paint, window frames for $50 bucks total… I realize now that I $50
seems like a lot for these but NO REGRETS… I wasn’t able to find a picture of
the frames when I picked them up, but they didn’t change much from the pictures
you see below except for the glass wasn’t shiny and there were a lot of webs
At the wedding we used them for
signs and enjoyed the rustic vibes they gave (see above). After the wedding I
decluttered as much as I could and found myself faced with these windows and
the ideas started flowing. The first project was this hinge-lid coffee table
that still needs painted. Color ideas? We just toss all of our travel tickets
and memorabilia under the glass and it effortlessly creates something
interesting for guests to look at. It wasn’t until many months later, when the
apartment started to come together, that I pulled the second window out of
storage and cleaned the glass.
I am obsessed with old barns
and there were several photographs on my Instagram of the old barns that I came
across as I began traveling Montana for a living. These photos were all taken
as a drive-by photoshoot; driving with my knee and holding my phone out the
window, while snapping as many pictures as possible in two seconds. It’s also
worth mentioning that my phone is one of those extremely outdated,
free-gift-when-you-sign-up-for-a-phone-plan, off brand phones with a horrible
To make matters worse, I no
longer had the originals on my phone and had no idea when the next time I would
get to drive by these barns again to stop and get a quality photo with my
camera. So, through trial an error I ended up pulling my Instagram up on my
laptop and used the Snipping Tool to save the pictures on to my computer. I
used Photoshop to change the photo from 50-some dpi to 300 dpi. I applied a
grey-scale filter and a little bit of “noise” to complete the vintage look.
Then I was able to order 8”x10” prints from Walmart. I chose 8”x10” because
each windoszpane measure 9 1/2”x15” and I thought that would leave just enough
of a glass border around the photos.
That day I learned that my Walmart photo center
becomes overwhelmed and goes out of commission during tourist season every
summer. I ended up waiting a few days for the photos to be ready but once I got
them the art piece came together quickly. After using a Clorox wipe to freshen
up the frame one more time, I just used very small pieces of extra clear office
tape to tack the corner of each picture to the middle of each
The last step to completing
this piece was to add these brackets to the back. I know that this is frame is
heavy and should be anchored into the studs. In this house the studs are 16”
apart. The frame measures 19 3/4” across the top so I divided that by 2 and
found the center point to be 9 7/8”. From the center point, I measured 8 inches
on either side. I then measured the width of the top frame; 2″. I made a mark
1″ down. “X marks the spot” to center the brackets over and nail them on. Next,
I used a stud finder and marked two adjacent studs, just above eye-level.Then
used a level to make sure the marks were straight. Lastly, I hammered a
2″ long finish nail into each mark.
The picture frame sits level on the nails, and I
couldn’t be more pleased with the final result. What do you guys think? Should
I freshen the paint, and replace the photos with sharper, clearer, possibly
even colored ones? Or do you like the farm-style, vintage look?